Struct bevy::render::mesh::morph::MorphWeights

pub struct MorphWeights { /* private fields */ }

Controls the morph targets for all child Handle<Mesh> entities. In most cases, MorphWeights should be considered the “source of truth” when writing morph targets for meshes. However you can choose to write child MeshMorphWeights if your situation requires more granularity. Just note that if you set MorphWeights, it will overwrite child MeshMorphWeights values.

This exists because Bevy’s Mesh corresponds to a single surface / material, whereas morph targets as defined in the GLTF spec exist on “multi-primitive meshes” (where each primitive is its own surface with its own material). Therefore in Bevy MorphWeights an a parent entity are the “canonical weights” from a GLTF perspective, which then synchronized to child Handle<Mesh> / MeshMorphWeights (which correspond to “primitives” / “surfaces” from a GLTF perspective).

Add this to the parent of one or more Entities with a Handle<Mesh> with a MeshMorphWeights.

Implementations

impl MorphWeights

pub fn new( weights: Vec<f32>, first_mesh: Option<Handle<Mesh>> ) -> Result<MorphWeights, MorphBuildError>

pub fn first_mesh(&self) -> Option<&Handle<Mesh>>

The first child Handle<Mesh> primitive controlled by these weights. This can be used to look up metadata information such as Mesh::morph_target_names.

pub fn weights(&self) -> &[f32]

pub fn weights_mut(&mut self) -> &mut [f32]

Trait Implementations

impl Clone for MorphWeights

fn clone(&self) -> MorphWeights

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Component for MorphWeights

where MorphWeights: Send + Sync + 'static,

const STORAGE_TYPE: StorageType = bevy_ecs::component::StorageType::Table

A constant indicating the storage type used for this component.

fn register_component_hooks(_hooks: &mut ComponentHooks)

Called when registering this component, allowing mutable access to its ComponentHooks.

impl Debug for MorphWeights

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for MorphWeights

fn default() -> MorphWeights

Returns the “default value” for a type.

impl FromReflect for MorphWeights

where MorphWeights: Any + Send + Sync, Vec<f32>: FromReflect + TypePath + RegisterForReflection, Option<Handle<Mesh>>: FromReflect + TypePath + RegisterForReflection,

fn from_reflect(reflect: &(dyn Reflect + 'static)) -> Option<MorphWeights>

Constructs a concrete instance of Self from a reflected value.

fn take_from_reflect( reflect: Box<dyn Reflect> ) -> Result<Self, Box<dyn Reflect>>

Attempts to downcast the given value to Self using, constructing the value using from_reflect if that fails.

impl GetTypeRegistration for MorphWeights

where MorphWeights: Any + Send + Sync, Vec<f32>: FromReflect + TypePath + RegisterForReflection, Option<Handle<Mesh>>: FromReflect + TypePath + RegisterForReflection,

fn get_type_registration() -> TypeRegistration

Returns the default TypeRegistration for this type.

fn register_type_dependencies(registry: &mut TypeRegistry)

Registers other types needed by this type.

impl Reflect for MorphWeights

where MorphWeights: Any + Send + Sync, Vec<f32>: FromReflect + TypePath + RegisterForReflection, Option<Handle<Mesh>>: FromReflect + TypePath + RegisterForReflection,

fn get_represented_type_info(&self) -> Option<&'static TypeInfo>

Returns the TypeInfo of the type represented by this value.

fn into_any(self: Box<MorphWeights>) -> Box<dyn Any>

Returns the value as a Box<dyn Any>.

fn as_any(&self) -> &(dyn Any + 'static)

Returns the value as a &dyn Any.

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Returns the value as a &mut dyn Any.

fn into_reflect(self: Box<MorphWeights>) -> Box<dyn Reflect>

Casts this type to a boxed reflected value.

fn as_reflect(&self) -> &(dyn Reflect + 'static)

Casts this type to a reflected value.

fn as_reflect_mut(&mut self) -> &mut (dyn Reflect + 'static)

Casts this type to a mutable reflected value.

fn clone_value(&self) -> Box<dyn Reflect>

Clones the value as a Reflect trait object.

fn set(&mut self, value: Box<dyn Reflect>) -> Result<(), Box<dyn Reflect>>

Performs a type-checked assignment of a reflected value to this value.

fn try_apply( &mut self, value: &(dyn Reflect + 'static) ) -> Result<(), ApplyError>

Tries to apply a reflected value to this value.

fn reflect_kind(&self) -> ReflectKind

Returns a zero-sized enumeration of “kinds” of type.

fn reflect_ref(&self) -> ReflectRef<'_>

Returns an immutable enumeration of “kinds” of type.

fn reflect_mut(&mut self) -> ReflectMut<'_>

Returns a mutable enumeration of “kinds” of type.

fn reflect_owned(self: Box<MorphWeights>) -> ReflectOwned

Returns an owned enumeration of “kinds” of type.

fn reflect_partial_eq(&self, value: &(dyn Reflect + 'static)) -> Option<bool>

Returns a “partial equality” comparison result.

fn debug(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Debug formatter for the value.

fn apply(&mut self, value: &(dyn Reflect + 'static))

Applies a reflected value to this value.

fn reflect_hash(&self) -> Option<u64>

Returns a hash of the value (which includes the type).

fn serializable(&self) -> Option<Serializable<'_>>

Returns a serializable version of the value.

fn is_dynamic(&self) -> bool

Indicates whether or not this type is a dynamic type.

impl Struct for MorphWeights

where MorphWeights: Any + Send + Sync, Vec<f32>: FromReflect + TypePath + RegisterForReflection, Option<Handle<Mesh>>: FromReflect + TypePath + RegisterForReflection,

fn field(&self, name: &str) -> Option<&(dyn Reflect + 'static)>

Returns a reference to the value of the field named name as a &dyn Reflect.

fn field_mut(&mut self, name: &str) -> Option<&mut (dyn Reflect + 'static)>

Returns a mutable reference to the value of the field named name as a &mut dyn Reflect.

fn field_at(&self, index: usize) -> Option<&(dyn Reflect + 'static)>

Returns a reference to the value of the field with index index as a &dyn Reflect.

fn field_at_mut(&mut self, index: usize) -> Option<&mut (dyn Reflect + 'static)>

Returns a mutable reference to the value of the field with index index as a &mut dyn Reflect.

fn name_at(&self, index: usize) -> Option<&str>

Returns the name of the field with index index.

fn field_len(&self) -> usize

Returns the number of fields in the struct.

fn iter_fields(&self) -> FieldIter<'_>

Returns an iterator over the values of the reflectable fields for this struct.

fn clone_dynamic(&self) -> DynamicStruct

Clones the struct into a DynamicStruct.

impl TypePath for MorphWeights

where MorphWeights: Any + Send + Sync,

fn type_path() -> &'static str

Returns the fully qualified path of the underlying type.

fn short_type_path() -> &'static str

Returns a short, pretty-print enabled path to the type.

fn type_ident() -> Option<&'static str>

Returns the name of the type, or None if it is anonymous.

fn crate_name() -> Option<&'static str>

Returns the name of the crate the type is in, or None if it is anonymous.

fn module_path() -> Option<&'static str>

Returns the path to the module the type is in, or None if it is anonymous.

impl Typed for MorphWeights

where MorphWeights: Any + Send + Sync, Vec<f32>: FromReflect + TypePath + RegisterForReflection, Option<Handle<Mesh>>: FromReflect + TypePath + RegisterForReflection,

fn type_info() -> &'static TypeInfo

Returns the compile-time info for the underlying type.